Project Zero G Forums

Built in just 5 Months, here is the madien cruise.......

http://s135.photobucket.com/albums/q136 ... ure017.flv

Cool as hell. John, we are not alone here anymore .

tumuchNOS wrote:Built in just 5 Months, here is the madien cruise.......

http://s135.photobucket.com/albums/q136 ... ure017.flv

Cool as hell. John, we are not alone here anymore .

haah thats good!! this swap isnt hard at all. i think in the next couple of years were gonna see alot more of this swap around here

is there daylight over there. im really suprised how many people have cool cars, but cant seem to get alright video at best. wheres the good video at. when i get off my lazy ass and finish my project. i will get good video.

carguyf545 wrote:is there daylight over there. im really suprised how many people have cool cars, but cant seem to get alright video at best. wheres the good video at. when i get off my lazy ass and finish my project. i will get good video.

Wow, great contribution. Next time we will take your feelings into account when we fire another RWD 4G63 at 10:00 at night. That way we can arrange for some better video coverage in order to appease your tastes, because I assure you we were hesitant for that very reason.

I couldnt see it either

What are you talking about. When I clicked on it there was this awesome swapped thing sliding around a Macy's parking lot.

why is it when you say something that someone does not like, they get butt hurt. and no im not takeing a shot at you. just like when peregrine told some one its better to have a low hp car that runs instead of a car sitting for years waiting on money.
if you want you can look down on me for not finishing my project after two years. shit i have two 2.4 motors sitting on engine stands. but im am going to tell the truth. i should be banner from the site cause it is takeing to long for me to swap motors.
im not talking shit when i say your video sucks, sorry to be the one to tell you. but its the truth. i would love to see your car in macy parking lot cutting cookies, drifting, in car video. you know some thing cool.

WHOOOOOOOOOOOOOOOAAAAAAAAAAAAAAAA! carguy

what is all this ' looking down at you' ?????????????????

take a deep breath set down a minute , everyone has unfinished cars If they were all finished, we wouldnt be here

For all of the people here whose eyes can't dialate, here is a pass 1/2 throttle through a couple of gears during the DAYTIME. We would have had an announcer and background music to please the entertainment buffs here, but due to last minute budget cuts we had to continue without those ammenities. Thats because we really just care about building cars/trucks as opposed to filming them .

Enjoy

http://s135.photobucket.com/albums/q136 ... 0_0702.flv

BTW John, listen close for the sound of tire spin while side stepping it at 4800 and you will be dissappointed. There is just the oh so gratifying sound of a motor bogging down as the truck lifts . .

Sweet. Way to step it up a notch

DJpowerHaus wrote:Sweet. Way to step it up a notch

yeah justin is an asshole but hes my kind of asshole a true showman

peregrine wrote:

DJpowerHaus wrote:Sweet. Way to step it up a notch

yeah justin is an asshole but hes my kind of asshole a true showman

Thank you sir, may I have another. .

very nice!!
who else has a "1G" swapped D50?

just me and you I guess

I have one being swapped at the moment. It's a little more than the average swap though...

Why do you say it is a little more than an average swap?

Dirtboy488 wrote:Why do you say it is a little more than an average swap?

attention to detail, money spent etc.

Oh, that explains everything now I dont even need to know anything about his build, I guess you pretty much summed it up. By attention to detail what do you mean? Because I already know the more money you spend the better your vehicle HAS to be right?

T

Most people just drop in a 4g63 do the wiring and plumb it up and call it good. I'm focusing on cleanliness, attention to detail, and just quality work, nothing half assed.

Factory shortblock with a built head. Top mount tubular exhaust manifold with a FP Green perched on top. Custom front IC. ARP/Stainless hardware used throughout. I'm missing alot more but it'll all be running through DSMlink. Behind it will be a R154 (thanks to Bill Hincher) sending power through a custom aluminum driveshaft to the factory MM (LSD) rear end.

Suspension will be for now just some 2" lowering springs up front with some lowering blocks out back with all poly bushings throughout. I will convert to a 4 link with coilovers eventually. As far as brakes I have yet to look into it but I want to use Evo front brakes and convert to disc in the rear as well.

There will be a fuel cell mounted in the bed along with a Aeromotive fuel pump and regulator. All lines will be stainless steel braided or nylon braided with the black AN fittings with a few Jiffy Tite connections on the fuel lines and what not to make engine removal easier and quicker.

Interior is gutted of all it's sound deadening with 1g DSM seats. No heater/blower assembly. Custom gauge cluster with Autometer gauges integrated into the factory MM assembly. Body harness will be rewired with a Painless 12 circuit harness with a push button start. Quick release steering wheel. Lexan rear glass. Carbon fiber door panels. And it will be eventually caged.

Meanwhile it'll all be a satin black on black wheels with all the dents and character as it was when I found it in the junkyard. Except the frame has been cleaned, sealed and re-undercoated. Probably have a few suspension parts powdercoated as well.

I guess that's a rough idea of what i'm doing. I missed quite a bit i'm sure. But my attention to detail is my forte.


Here it is the day I saved it from the crusher...

Kinda sounds like my truck minus the dash, and door panels.........To bad you did not live closer

Dirtboy488 wrote:Oh, that explains everything now I dont even need to know anything about his build, I guess you pretty much summed it up. By attention to detail what do you mean? Because I already know the more money you spend the better your vehicle HAS to be right?

T

thats exactly right. i dont use cheap ass fram filters on any of my cars

You did that whole post over an oil filter? Well just to let you know there is not a fram on my truck or the colt.

Dirtboy488 wrote:You did that whole post over an oil filter? Well just to let you know there is not a fram on my truck or the colt.

but there was...

lighten up. your never gonna make it if you cant take some ribbing on the internet.

I am one of the thickest skinned people you will ever meet, but its no fun if you cant dish itout sometimes.

And as far as there was goes....... Your trannys cost qite a bit more to replace than my oil filter But that all part of the learning curve, and sometimes it gets very expensive.

Dirtboy488 wrote:And as far as there was goes....... Your trannys cost qite a bit more to replace than my oil filter But that all part of the learning curve, and sometimes it gets very expensive.

never had one tranny problem.......

its the fucking POS buschur convertor thats the bane of my existence

peregrine wrote:its the fucking POS buschur convertor thats the bane of my existence

I remeber you lecturing me on how bullitproof it was, I remain skeptical. Of course, when you come by next time you can see where I ripped the trans mount off of the tailsection, and cracked all of the bell housing bolt holes. Time to come up with a real solution and still get to step off the clutch at 6000 .

shit you guys get off easy, this is the crap Matt throws at me after he delets my posts

[quote="mattmartindrift"]Look bill, I'm over it. Obviously you aren't if you want to debate, keep it to PM. That is why I deleted your post.

I love new ways of looking at things, new theories, new everything, if I didn't i'd be some crazy Christian thinking the world is 6,000 years old, evolution isn't real, and Jesus was white.

However, I like reason and REAL data supporting the great new ideas and theories. If reason and data were not needed, then the world would be flat, and the universe would orbit about us based on what engineers back in the day thought. So drop the bullshit seriously. I love new ideas, new everything, I don't like people who play on their computers and buy some software and think they own the world.

maybe he was an alter boy

I feel like I finally have the sorority I always wanted.

DJpowerHaus wrote:I feel like I finally have the sorority I always wanted.

cool lets see some action like we all hear about in the sororitys

you mean?????????

peregrine wrote:

are you guys gonna touch pee-pees? [/quote]




I donno man..........I kinda got away from that ........

Thats some funny S#%t