Search found 43 matches

Go to advanced search

by widebodywoody
Sat Oct 06, 2018 12:53 am
Forum: Swap Mechanical
Topic: Running A/C with a 6 bolt
Replies: 0
Views: 1113

Running A/C with a 6 bolt

Hi guys

I have purchased a narrowblock 6 bolt Hyundai twin cam (G4CP) same as the VR4. I need to know,
1) What do you run to have power steering? The VR4 power steering pump? Because I have one.
2) What do you run to have air conditioning with this motor?

I can pretty much cover the rest. I have ...
by widebodywoody
Fri Mar 15, 2013 9:46 am
Forum: Swap Mechanical
Topic: YOU WON'T BELIEVE...
Replies: 2
Views: 5297

I recently just rebuilt my clevis because the rubber gromet let go. I rebuilt it with 3 x 12mm washers and some grease. Now it is awesome. No play = the bomb.
by widebodywoody
Mon Nov 05, 2012 10:48 pm
Forum: Swap Mechanical
Topic: Help with 4G64 + 4G63 Combo
Replies: 2
Views: 3276

I have the option to buy a 4G64 crank that hopefully fits this. But should I do that worrying about if it is the correct one or not, or get my hands on a Hyundai block with crank?
by widebodywoody
Thu Nov 01, 2012 7:28 pm
Forum: Swap Mechanical
Topic: Help with 4G64 + 4G63 Combo
Replies: 2
Views: 3276

Help with 4G64 + 4G63 Combo

I have purchased what I was led to believe is a 4G64 6 bolt 8 valve wideblock. Unfortunately the crank wasn't in it when I went to pick it up, so I can't verify that. I need to know if it is a wideblock or not and would suite the 4G64+4G63 head build for my starion.

Here is a photo with the ...
by widebodywoody
Fri Jul 13, 2012 9:30 pm
Forum: Swap Mechanical
Topic: 4G63 DOHC: what angle is this?
Replies: 2
Views: 3433

Using some basic math, its about 56 deg in that photo. But the problem is you drew the lines or someone else did, and its not accurate by any means.
by widebodywoody
Fri Jul 06, 2012 7:08 pm
Forum: General
Topic: 2.1L "destroker" motor (2.4L Block, 2.0L crank)?
Replies: 11
Views: 11006

Mine says

4G64
PK4394

Any ideas if this is the one I would want?
by widebodywoody
Sat Jun 23, 2012 10:05 pm
Forum: Swap Mechanical
Topic: Is the G64B available as wideblock and narrowblock ?
Replies: 6
Views: 5402

I have a query. If I got a wideblock 2.4 4G64 block, will it work, or does it have to be an EXACT type of wideblock 4G64?
by widebodywoody
Mon Jun 04, 2012 12:26 am
Forum: Swap Mechanical
Topic: 4G64 lower end timing parts?
Replies: 7
Views: 4560

I do take it you mean the 4G64 block not the 4G54 block? Because if you mean the 4G54 block, then unfortunately it won't work. I wish it would but it doesn't.
by widebodywoody
Sat May 26, 2012 7:58 am
Forum: Swap Mechanical
Topic: New 4G64 piston option?
Replies: 8
Views: 6254

I second that
by widebodywoody
Wed May 23, 2012 1:34 am
Forum: Swap Mechanical
Topic: What wiseco pistons
Replies: 8
Views: 7761

I am not set on wiseco's. I prefer CP pistons. I had a set of CP forged pistons until today as they were for a 4G63 2.0 DOHC build which I changed my mind from. So I sold them and want to get the 2.4 pistons. All I want is forged pistons that don't rattle and will last.

Anyone know where I can get ...
by widebodywoody
Tue May 22, 2012 7:27 pm
Forum: Swap Mechanical
Topic: What wiseco pistons
Replies: 8
Views: 7761

what do you mean by duh?

Are the pistons I linked to the type I am after. i.e. they would fit if I order the right bore size? Will they suit the stroker build.
by widebodywoody
Mon May 21, 2012 7:35 pm
Forum: Swap Mechanical
Topic: What wiseco pistons
Replies: 8
Views: 7761

What wiseco pistons

Hey guys.

I am doing the DOHC conversion, with the 4G64 wideblock 6 bolt SOHC 8V block. I have 100mm Eagle Rods, and need to know what wiseco pistons will suit.

Would these suit?
http://www.ebay.com.au/itm/Wiseco-Pistons-Mitsubishi-4G64-4G63-Head-21mm-pin-1988-92-87mm-Bore-K564M87-/330726435658?pt ...
by widebodywoody
Wed Feb 22, 2012 12:27 am
Forum: Swap Mechanical
Topic: 4g63/4g64 question
Replies: 2
Views: 2775

http://projectzerog.com/sohc-dohc.shtml

About half way down the page.

On another note, the rods are the same, the pistons in the 64 are bigger, and the cranks can be interchanged BUT it will change the stroke length. 63 stroke in 64 block lowers it from a 2.4, and a 64 crank in a 63 block raises ...
by widebodywoody
Fri Jan 27, 2012 10:49 pm
Forum: Swap Mechanical
Topic: 4G64 narrow block VS 4g63 narrow block
Replies: 15
Views: 11531

Awesome. So I will pick up a 4G64 block and crank, use my 4G63 eagle rods. Replace my 4G63 CP pistons with 4G64 Forged Pistons and we are good to go :D

Awesome can't wait. I had no idea the rods were the same until last night. Now I am confident that I want to do the 2.4 over the 2.0 or 2.6 ...
by widebodywoody
Fri Jan 27, 2012 8:42 am
Forum: Swap Mechanical
Topic: 4G64 narrow block VS 4g63 narrow block
Replies: 15
Views: 11531

So the 4G64 and 4G63 rods are both exactly the same? And the 63 rods can be used in the 64 block still keeping the 2.4 capacity?
by widebodywoody
Tue Jun 09, 2009 8:31 pm
Forum: Swap Mechanical
Topic: Throttle body on backwards?
Replies: 9
Views: 4418

not sure if its just me but I can't see a picture...
by widebodywoody
Fri Mar 13, 2009 8:01 pm
Forum: Swap Mechanical
Topic: bsek on sohc question
Replies: 2
Views: 2208

yeah but when my belt snapped on one of the shafts, my engine would shake way too much and stall around 4000-5000rpms.
by widebodywoody
Fri Mar 13, 2009 1:16 am
Forum: Swap Mechanical
Topic: bsek on sohc question
Replies: 2
Views: 2208

It will prevent the belt from failing but your engine will become very unbalanced and usually cuts out around 5000rpm's. If both belts were removed (I know no oil...) Your engine will be stable. But no oil once again :p

It will be unbalanced because one balance shaft will still be spinning ...
by widebodywoody
Thu Mar 12, 2009 9:04 am
Forum: Swap Mechanical
Topic: EVO bolt patterns compared to 4g63
Replies: 36
Views: 35141

You can tell it all by its crank. VR4 and Evo1-3 blocks had a 6 bolt crank. In that picture you can clearly see its a 7 bolt crank. Which means its a Evo4-9 block.
by widebodywoody
Fri Mar 06, 2009 6:49 am
Forum: Swap Mechanical
Topic: Gearbox limitations
Replies: 1
Views: 1312

Gearbox limitations

Hey all. I am just wondering what RWHP the standard 2.6 gearbox's start to fail at. Or if no one knows for sure, what is the highest HP that anyone has put through the boxes. Cheers.
by widebodywoody
Mon Feb 23, 2009 3:58 pm
Forum: Swap Mechanical
Topic: Where's Bill - I need an intake
Replies: 9
Views: 3827

ahh so this is just modifying the stock intakes? ok thanks. I thought it was a custom one. Cheers
by widebodywoody
Sun Feb 22, 2009 6:27 pm
Forum: Swap Mechanical
Topic: Where's Bill - I need an intake
Replies: 9
Views: 3827

AHHH ok thanks. I thought you meant posting them out to buyers. Sorry didn't understand. :) Awesome thanks. Can't wait :D :D :D
by widebodywoody
Sun Feb 22, 2009 7:03 am
Forum: Swap Mechanical
Topic: Where's Bill - I need an intake
Replies: 9
Views: 3827

Can I see some pics of these intakes? I am currently looking to get an intake for my conversion. Thanks.
by widebodywoody
Thu Feb 19, 2009 1:20 am
Forum: Swap Mechanical
Topic: 4G63 EVO Intake
Replies: 17
Views: 13381

JM Fabrications can reverse the throttle body position at no extra charge. They are a good option.
by widebodywoody
Wed Feb 18, 2009 1:06 am
Forum: Swap Mechanical
Topic: 4G63 EVO Intake
Replies: 17
Views: 13381

No it wont. The flange to bolt to the head is wrong. But I believe you can modify it to suite.

You can always get a JM Fabrications inlet manifold, as they make them facing both ways.

If they are aftermarket, you can always ask them to reverse it, they usually do it at no extra cost.
by widebodywoody
Tue Feb 17, 2009 11:27 pm
Forum: Swap Mechanical
Topic: Brackets for 4G63 DOHC on 8 Valve Starion Block help
Replies: 1
Views: 1908

Ok I am in Australia with a 4G54 Widebody. But I was referring to the 4G63 Starion 8 Valve block. Help? Thanks
by widebodywoody
Tue Feb 17, 2009 8:00 pm
Forum: Swap Mechanical
Topic: Brackets for 4G63 DOHC on 8 Valve Starion Block help
Replies: 1
Views: 1908

Brackets for 4G63 DOHC on 8 Valve Starion Block help

Hi guys.

I am trying to do the DOHC head conversion on a Starion.

I need to find out about the bracket system. I have been told the L300 block has the holes to
run all the DOHC standard brackets. Is this true?

I need to run the VR4 power steering pump, VR4 Alternator, and Starion Aircon system ...
by widebodywoody
Tue Jan 27, 2009 5:26 pm
Forum: Swap Mechanical
Topic: headgasket choice for high comp twincam 4g64 na?
Replies: 6
Views: 3951

it could be overkill but if it was me, I would be doing all I could to make sure my gasket doesn't blow in the future. Just had to fix the father in laws head gasket on a van. I know it wasnt the gaskets fault, but it blew too easily.

Thats just me, I like overkill :wink:
by widebodywoody
Mon Jan 26, 2009 4:09 am
Forum: Swap Mechanical
Topic: headgasket choice for high comp twincam 4g64 na?
Replies: 6
Views: 3951

I have heard cometic head gasket would be the best way to go. They are the best I hear
by widebodywoody
Sat Jan 24, 2009 6:39 pm
Forum: Swap Mechanical
Topic: Twin Cam conversion questions
Replies: 15
Views: 6817

thanks.

I ended up finding the manual I was after. :)

It was located on www.austarion.com

Your source for everything starion :p
by widebodywoody
Sat Jan 24, 2009 3:12 am
Forum: Swap Mechanical
Topic: Twin Cam conversion questions
Replies: 15
Views: 6817

does anyone have pics of the pin mechanism that push's the belt tensioner? I don't know what the hell I am looking for. Cheers. Still haven't found the manual, shannon hasn't been online for me to talk to him yet.
by widebodywoody
Mon Jan 12, 2009 5:50 pm
Forum: Swap Mechanical
Topic: Twin Cam conversion questions
Replies: 15
Views: 6817

Cheers shannon. I really appreciate it. Its so hard to fine where bits and pieces go without reference. :lol:
by widebodywoody
Sun Jan 11, 2009 8:39 pm
Forum: Swap Mechanical
Topic: Twin Cam conversion questions
Replies: 15
Views: 6817

any online manuals for this?
by widebodywoody
Thu Jan 08, 2009 7:19 pm
Forum: Swap Mechanical
Topic: Twin Cam conversion questions
Replies: 15
Views: 6817

Cheers.

Does anyone know where I can get my hands on a 4G63 Galant DOHC or EvoI -> EvoIII workshop manual. This would help me a hell of a lot. Because most of my problems is just identifying what bracket goes where and what they look like. Cheers
by widebodywoody
Wed Jan 07, 2009 6:23 am
Forum: Swap Mechanical
Topic: Twin Cam conversion questions
Replies: 15
Views: 6817

Ok last post sorted, the hole for the bracket was hidden behind the gasket.
Thanks
by widebodywoody
Tue Jan 06, 2009 5:39 pm
Forum: Swap Mechanical
Topic: Twin Cam conversion questions
Replies: 15
Views: 6817

Ok I need more help. I found the bracket in my box of goodies, but the I overlooked it because I can't see where it bolts onto.

Now I have the bracket:
http://www.fr33z3.net/starions/Apr06/photo1.jpg

And as far as I can see, only one bolt hole lines up at a time. The top one seems best, but that ...
by widebodywoody
Tue Jan 06, 2009 5:44 am
Forum: Swap Mechanical
Topic: Twin Cam conversion questions
Replies: 15
Views: 6817

Thats where I got the above picture from... I was after a picture of just the bracket. But thanks I found it elsewhere.

Image
by widebodywoody
Mon Jan 05, 2009 6:21 pm
Forum: Swap Mechanical
Topic: Twin Cam conversion questions
Replies: 15
Views: 6817

BUMP help please :D
by widebodywoody
Sun Jan 04, 2009 6:45 pm
Forum: Swap Mechanical
Topic: Twin Cam conversion questions
Replies: 15
Views: 6817

Ahh ok thought so. Anyone got a picture of what the bracket by itself looks like? Would be a huge help. Thanks.
Oh and is it just the one bracket I will need or are there more?
by widebodywoody
Sun Jan 04, 2009 7:23 am
Forum: Swap Mechanical
Topic: Twin Cam conversion questions
Replies: 15
Views: 6817

Twin Cam conversion questions

Hey guys, basically, I am currently doing the DOHC head onto a SOHC 4g63 block.

I have swapped the DOHC front assembly onto the SOHC block, and it fits nicely, the head is sitting on the block atm, and I have put on the DOHC crank and balance pulleys. Currently I am trying to fit the belt, but I ...
by widebodywoody
Tue May 27, 2008 1:07 am
Forum: Swap Mechanical
Topic: SOHC 4G63 Starion block Q
Replies: 1
Views: 1682

SOHC 4G63 Starion block Q

Hey guys

I couldn't find a definitive answer to this rather simple question anywhere...

Is the block height for a SOHC starion block the same as a VR4/Evo1-3 Block??

I ask because or rod lengths. I want to know if I get a set of Eagle rods for a Evo1-3 For compression 8.5 that the compression ...
by widebodywoody
Tue Mar 18, 2008 1:40 am
Forum: Swap Mechanical
Topic: DOHC engine relocation question
Replies: 4
Views: 2484

Yeah thanks, I had already found out about those, but I had heard of some people just moving the engine forward and leaving those lines there. Cheers for clearing it up anyways, it seems like a better idea to re-locate them.
by widebodywoody
Tue Feb 26, 2008 2:13 am
Forum: Swap Mechanical
Topic: DOHC engine relocation question
Replies: 4
Views: 2484

DOHC engine relocation question

Hey guys.

To start off I will let you know what I am planning to do.
I am building a DOHC 2.0Litre motor. From the Galant Vr4 Head and the Mitsubishi Starion 2.0Litre SOHC engine. There is only one problem with this. If I do this, the Thermostat will hit the firewall as well as the CAS. This engine ...

Go to advanced search