Project Zero G Forums Forum Index
Author Message
<  Swap Electrical  ~  4g63 into conquest with stock dsm ecu/harness?
Corey
PostPosted: Fri Mar 25, 2011 9:15 pm  Reply with quote
Knowlege Seeker


Joined: 25 Mar 2011
Posts: 9

Is this possible? Can i just use a 1g dsm ecu and engine harness? What all would need done to make this work?

thanks!
Back to top
View user's profile Send private message
Verdad
PostPosted: Sat Mar 26, 2011 12:16 am  Reply with quote
Addict


Joined: 11 Oct 2009
Posts: 51

I'll get this one.

Before you choose the forums, on the main page there is a wealth of info regarding this swap. From coolant options, to tranny choices, to wiring info specifically detailing a starquest.

Post linked so I don't come off too douchy

http://projectzerog.com/wiring-how_to.shtml
Back to top
View user's profile Send private message
Corey
PostPosted: Sat Mar 26, 2011 11:57 pm  Reply with quote
Knowlege Seeker


Joined: 25 Mar 2011
Posts: 9

Alright thanks!

Few more quick questions...

Under the B38 section, what is the plug in picture number 2 there? pic 1 is b38 right?

Secondly, this tells me how to use a 1g harness, not ecu?

or is the ecu just as easy as plugging it in?
Back to top
View user's profile Send private message
Corey
PostPosted: Sun Mar 27, 2011 12:05 am  Reply with quote
Knowlege Seeker


Joined: 25 Mar 2011
Posts: 9

duh brain fart.

The engine harness plugs right into the ecu. So 1g ecu plugs directly into the 1g harness. Then then 1g harness connects to the chassis harness at B38, which is what you need to mod to get it to work with the starion, right?

sorry guys, be patient with me!
Back to top
View user's profile Send private message
Corey
PostPosted: Sun Mar 27, 2011 12:13 am  Reply with quote
Knowlege Seeker


Joined: 25 Mar 2011
Posts: 9

and wheres the pinout for b38?

Are the two pictures under the "B38 - The Starion Half of Wiring" Section for the 1g harness or for the starion b38 plug, or both? If both, the information directly below that is four which one? and which one is which? Sorry, this is just a bit of a jumble to me. Trying to take in alot at once.
Back to top
View user's profile Send private message
Corey
PostPosted: Mon Mar 28, 2011 10:42 am  Reply with quote
Knowlege Seeker


Joined: 25 Mar 2011
Posts: 9

bump
Back to top
View user's profile Send private message
JDOliver
PostPosted: Wed Mar 30, 2011 11:46 am  Reply with quote
Addict


Joined: 17 May 2009
Posts: 135
Location: Western KY

Just to let you know, if you haven't realized it yet, the number of people who have actually done the full DSM/Starion wire swap are very few. Perhaps three that I can think of, and it's been a while since they've done it.

Someone bumped the wiring diagrams, probably for you. You can't get in a hurry on this forum, people take years to get stuff built, and forget things they did in the process. Good luck.
Back to top
View user's profile Send private message
Corey
PostPosted: Wed Mar 30, 2011 1:11 pm  Reply with quote
Knowlege Seeker


Joined: 25 Mar 2011
Posts: 9

Well, hopefully ill be number 4.

I think ive got things figured out, so hopefully ill be able to start a project thread shortly, and be added to the short list of 4g63 stock ecu people.
Back to top
View user's profile Send private message
knuckshaft
PostPosted: Thu Mar 31, 2011 8:26 am  Reply with quote
Knowlege Seeker


Joined: 03 Jan 2010
Posts: 25

I can build you a harness if you'd like. It would be universal to fit any car and you just run a couple of power wires and a couple of ignition sources.
Back to top
View user's profile Send private message Send e-mail
Corey
PostPosted: Fri Apr 01, 2011 7:42 am  Reply with quote
Knowlege Seeker


Joined: 25 Mar 2011
Posts: 9

for now im going to try and just use a stock 1g harness, and remove all the unnecessary bits from it, and mod plug b38, and hope that works. If it does not, ill get ahold of ya:
Back to top
View user's profile Send private message
DJpowerHaus
PostPosted: Fri Apr 01, 2011 11:38 am  Reply with quote
Sir Post A Lot


Joined: 07 Apr 2004
Posts: 1773
Location: Hereford Zone, MD

I did it on my first swap and I did a few harnesses for other people since then. Its not too hard to figure out if you have wiring diagrams for each harness. Label all plugs and strip the looming off the harness. Trace everything out on both harnesses and label the wires. Strip out everything you dont need. Before you know it you'll have a few connectors on the DSM harness that map to the B38 plug on the starion. After that you just need to splice on the Starion connector from the Starion engine harness.

_________________

Getting the engine bolted in is about 10% of the way there.
The next 80% can go quickly with help and skill.
That last 10% takes about as long as the 90% that came before it.
Back to top
View user's profile Send private message Visit poster's website AIM Address
Corey
PostPosted: Sun Apr 03, 2011 7:16 pm  Reply with quote
Knowlege Seeker


Joined: 25 Mar 2011
Posts: 9

i have access to wiring diagrams through mitchell and alldata, im gonna print em out tomorrow, and go through and sort out whats needed, whats not,etc. Highlight what i need, etc. Maybe ill copy it and post it up online.
Back to top
View user's profile Send private message
Display posts from previous:   
All times are GMT - 5 Hours

View next topic
View previous topic
Page 1 of 1
Project Zero G Forums Forum Index  ~  Swap Electrical

Post new topic   Reply to topic


 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum




Powered by phpBB and Ad Infinitum v1.06